Shenzhen Voboal Industrial Automation Co., Ltd.
Provide one-stop industrial control spare parts warehouse for customers
Add to Cart
IFM Flush pressure sensor with analogue display PG2733 PG-025-REA01-MFRKG/US/ /P
The IFM PG2733 PG-025-REA01-MFRKG/US/P is a flush pressure sensor with an analog display. Here's some information about the sensor:
1. Model: PG2733 PG-025-REA01-MFRKG/US/P
2. Manufacturer: IFM Electronic GmbH
3. Function: The flush pressure sensor is designed to measure the pressure of a fluid in a system or process. It provides real-time pressure readings and features an analog display for on-site monitoring of the measured values.
4. Pressure Measurement Range: The specific pressure measurement range of the sensor depends on the model variant. Unfortunately, the provided model number does not contain information about the pressure range. It's recommended to refer to the product documentation or datasheet for the exact pressure measurement range of this particular model.
5. Analog Display: The sensor is equipped with an analog display, which typically consists of a needle or pointer that moves along a scale to indicate the pressure value. The analog display provides a continuous representation of the pressure measurement rather than a digital readout.
6. Electrical Connection: The sensor supports a specific electrical connection type, indicated by the "/US/P" in the model name. The "/US" may represent a connector or electrical connection type compatible with the US market, while the "/P" could indicate additional details regarding the electrical connection or functionality. For precise information, it's best to consult the product documentation or datasheet.
7. Housing Type: The sensor is likely housed in a robust enclosure suitable for industrial environments. The specific details of the housing type or design are not evident from the provided model number.
For detailed specifications, installation guidelines, and compatibility information for the IFM PG2733 PG-025-REA01-MFRKG/US/P flush pressure sensor with an analog display, it is recommended to consult the official documentation provided by IFM Electronic GmbH or contact their technical support. They will be able to provide you with accurate and up-to-date information based on your specific requirements and the latest product information available.
Product characteristics
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 | ||
| Measuring range |
| ||
| Process connection | threaded connection G 1 external thread Aseptoflex Vario |
Application
| Special feature | Gold-plated contacts | ||
| Application | flush mountable for the food and beverage industry | ||
| Media | viscous media and liquids with suspended particles; liquids and gases | ||
| Medium temperature [°C] | -25...125; (145 max. 1h) | ||
| Min. bursting pressure |
| ||
| Pressure rating |
| ||
| Type of pressure | relative pressure; vacuum | ||
| No dead space | yes | ||
| MAWP (for applications according to CRN) [bar] | 60 |
Electrical data
| Operating voltage [V] | 18...32 DC |
| Current consumption [mA] | < 70; (24 V) |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 6 |
| Integrated watchdog | yes |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; analogue signal; (configurable) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 1 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V] | 2 |
| Permanent current rating of switching output DC [mA] | 250 |
| Switching frequency DC [Hz] | 50 |
| Number of analogue outputs | 1 |
| Analogue current output [mA] | 4...20, invertible; (scalable) |
| Max. load [Ω] | (Ub - 10 V) / 20 mA |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Measuring/setting range
| Measuring range |
| ||
| Set point SP |
| ||
| Reset point rP |
| ||
| Analogue start point |
| ||
| Analogue end point |
| ||
| In steps of |
|
Accuracy / deviations
| Switch point accuracy [% of the span] | < ± 0,2; (Turn down 1:1) |
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation [% of the span] | < ± 0,2; (Turn down 1:1 linearity, incl. hysteresis and repeatability limit value setting to DIN 16086) |
| Linearity deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Hysteresis deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Long-term stability [% of the span] | < ± 0,1; (Turn down 1:1; per year) |
| Temperature coefficient zero point [% of the span / 10 K] | < ± 0,05; (0...70 °C) |
| Temperature coefficient span [% of the span / 10 K] | < ± 0,15; (0...70 °C) |
Response times
| Response time [ms] | < 10 |
| Damping process value dAP [s] | 0.01...30 |
| Damping for the analogue output dAA [s] | 0.01...30 |
| Step response time analogue output [ms] | 25 |
Operating conditions
| Ambient temperature [°C] | -25...80 |
| Storage temperature [°C] | -40...100 |
| Protection | IP 67; IP 69K |
